Han Ay Lie

Professor of Structural and Material Engineering at Diponegoro University

About

About

  • Profile
  • The Han Family
  • Organization
  • Scientific Committees
  • External Examiner / Advisor
NameHan Ay Lie

Date of birth		9 November 1956

Degree		Professor in Civil Engineering

Affiliation		Engineering Faculty, Diponegoro University
Email[email protected], [email protected]

 

Academic Profile

 

Research Interest

  • Retrofitting and external reinforcing
  • Modeling and Finite Element Analyses
 

Keluarga Han dari Lasem

Keluarga Han dari Lasem, juga disebut Keluarga Han dari Jawa Timur atau Surabaya, adalah sebuah keluarga berpengaruh dari 'Cabang Atas' atau priyayi Tionghoa dari Hindia Belanda (sekarang Indonesia).

Referensi

  1. Salmon, Claudine (1991). "The Han Family of East Java. Entrepreneurship and Politics (18th-19th Centuries)". Archipel. 41 (1): 53–87. doi:10.3406/arch.1991.2711. 
  2. Dobbin, Christine E. (1996). Asian Entrepreneurial Minorities: Conjoint Communities in the Making of the World-economy 1570-1940 (dalam bahasa Inggris). Taylor & Francis. ISBN9780700704040. 
  3. Salmon, Claudine (2004). "The Han Family from the Residency of Besuki (East Java) as Reflected in a Novella by Tjoa Boe Sing (1910)". Archipel. 68 (1): 273–287. doi:10.3406/arch.2004.3837. 

 

 

Organization Function Since
Laboratorium Bahan dan Konstruksi, Teknik Sipil UNDIP Ketua 2004 – 2012
Kelompok Keahlian Struktur, Teknik Sipil UNDIP Ketua 2012 – 2014
American Concrete Institute ACI Anggota 1990 - Sekarang
Indonesia Construction Association (HAKI) Pengurus pusat 2006 – sekarang
American Concrete Institute (ACI) Chapter Indonesia Sekretaris 2013 – sekarang
fib-CEB International Commission 7 Sustainable Concrete, Member 2015 - sekarang
SNI Concrete and FRP team Anggota 2018 - sekarang
Indonesian Code on Seismic Evaluation and Retrofitting Advisory Board 2021
Institution/University Function
Ph.D. Program, Department of Civil Engineering, National Cheng Kung University, Taiwan Co-Advisor
Master Program, Department of Civil and Disaster Prevention Engineering, National United University, Taiwan Co-Advisor
Degree of Master of Science, Department of Civil Engineering, National Cheng Kung University, Taiwan Examiner
PhD TU Delft Graduate School, The Netherlands Examiner
Degree of Doctor of Philosophy, Curtin University, Australia Examiner


Name

 Han Ay Lie


Date of birth

 9 November 1956


Degree

 Professor in Civil Engineering


Affiliation

 Engineering Faculty, Diponegoro University


Email

 [email protected], [email protected]

Academic Profile

Research Interest

  • Retrofitting and external reinforcing
  • Modeling and Finite Element Analyses

The Han Family

Keluarga Han dari Lasem

Keluarga Han dari Lasem, juga disebut Keluarga Han dari Jawa Timur atau Surabaya, adalah sebuah keluarga berpengaruh dari ‘Cabang Atas’ atau priyayi Tionghoa dari Hindia Belanda (sekarang Indonesia).

Referensi

  1. Salmon, Claudine (1991). “The Han Family of East Java. Entrepreneurship and Politics (18th-19th Centuries)”. Archipel. 41 (1): 53–87. doi:10.3406/arch.1991.2711. 
  2. Dobbin, Christine E. (1996). Asian Entrepreneurial Minorities: Conjoint Communities in the Making of the World-economy 1570-1940 (dalam bahasa Inggris). Taylor & Francis. ISBN9780700704040. 
  3. Salmon, Claudine (2004). “The Han Family from the Residency of Besuki (East Java) as Reflected in a Novella by Tjoa Boe Sing (1910)”. Archipel. 68 (1): 273–287. doi:10.3406/arch.2004.3837. 

 

 

Organization

Organization Function Since
Laboratorium Bahan dan Konstruksi, Teknik Sipil UNDIP Ketua 2004 – 2012
Kelompok Keahlian Struktur, Teknik Sipil UNDIP Ketua 2012 – 2014
American Concrete Institute ACI Anggota 1990 - Sekarang
Indonesia Construction Association (HAKI) Pengurus pusat 2006 – sekarang
American Concrete Institute (ACI) Chapter Indonesia Sekretaris 2013 – sekarang
fib-CEB International Commission 7 Sustainable Concrete, Member 2015 - sekarang
SNI Concrete and FRP team Anggota 2018 - sekarang
Indonesian Code on Seismic Evaluation and Retrofitting Advisory Board 2021

Scientific Committees/Reviewer/Editor

External Examiner / Advisor

Institution/University Function
Ph.D. Program, Department of Civil Engineering, National Cheng Kung University, Taiwan Co-Advisor
Master Program, Department of Civil and Disaster Prevention Engineering, National United University, Taiwan Co-Advisor
Degree of Master of Science, Department of Civil Engineering, National Cheng Kung University, Taiwan Examiner
PhD TU Delft Graduate School, The Netherlands Examiner
Degree of Doctor of Philosophy, Curtin University, Australia Examiner

Publication

 

Scopus Indexed Internasional Journal

  1. Triwiyono, A., Han, A. L., Aryanto, A., Tudjono, S., Gan, B. S., 2020, “Effect of Specimen Gauge Reduction on Uniaxial Tension Properties of Reinforcing Steel”, Journal of Iron and Steel Research International, 27(8), Pp. 964-971. https://doi.org/10.1007/s42243-020-00458-1
  1. Anggoro, P. W., Anthony, A. A., Tauviqirrahman, M., Jamari., Bayuseno, A. P., Han, A. L., 2020, “Machining Parameter Optimization of EVA Foam Orthotic Shoe Insoles”, International Journal of Engineering and Technology, Vol. 10(3), Pp. 179-190. https://doi.org/10.46604/ijeti.2020.5099
  1. , Hung, C. C., Prasetya, B. H., Han, A. L., 2020, “The Behavior of Reinforced Concrete Members with Section Enlargement Using Self-Compacting Concrete”, International Review of Civil Engineering, Vol. 11(3), Pp. 121-126. https://doi.org/10.15866/irece.v11i3.18574
  1. Haryanto, Y., Hu, H. T., Lie, H. A., Atmajayanti, A. T., Galuh, D. L. C., Hidayat, B. A., 2019, “Finite Element Analysis of T-Section RC Beams Strengthened by Wire Rope in The Negative Moment Region With an Addition of Steel Rebar at The Compression Block”, Jurnal Teknologi, Vol. 81(4), Pp. 143-154.
  1. Maryoto, A., Aylie, H., Wariyatno, N.G, 2018, “The Live Load Capacity of Rectangular Precast Reinforced Concrete Stick Plates”, International Review of Civil Engineering, Vol. 9(5), Pp. 174-180. https://doi.org/10.15866/irece.v9i5.15542
  1. Jamari, J., Han, A. L., Saputra, E., Anwar, I. , van der Heide, E., 2018, “The Effect of Additional Layer Between Liner and PMMA on Reducing Cracks of Cement Mantle Hip Joints”, International Journal of Engineering and Technology Innovation, Vol. 8(2), Pp. 99-106.
  1. Tudjono, S., Han A. L., Gan, B. S., 2018, “An Integrated System for Enhancing Flexural Members’ Capacity via Combinations of the Fiber Reinforced Plastic Use, Retrofitting, and Surface Treatment Techniques”, International Journal of Technology, Vol. 9(1), Pp. 1-15. https://doi.org/10.14716/ijtech.v9i1.298

 

Internasional Journal

  1. Haryanto, Y., Hu, H.-T., Han, A. L., Hidayat, B. A., Indriyati, E. W., 2019, “On the Performance of a Multi Story Irregular Apartment Building Model Under Seismic Load in Indonesian Moderately High Seismicity Region”, Aceh International Journal of Science and Technology, Vol. 8(1), Pp. 1-11. https://doi.org/10.13170/aijst.8.1.5636
  1. Budipriyanto, A. Han, A. L., Hu, H. T., 2018, “Bond-shear Behavior of FRP Rods as a Function of Attachment Configuration”, Journal of Advanced Civil and Environmental Engineering, Vol 1(1), P 9-17. https://doi.org/10.30659/jacee.1.1.9-17

 

Scopus Indexed Proceedings

  1. Qomaruddin, M., Han A. L., Hidayat, A., Sudarno., Kustirini, A., 2019, “Compressive Strength Analysis on Geopolymer Paving by Using Waste Substitution of Carbide Waste and Fly Ash”, Journal of Physics: Conference Series, Vol. 1424, Pp. 1-6. https://doi.org/10.1088/1742-6596/1424/1/012052
  1. Kiryu, , Alisjahbana, S. W., Alisjahbana, I., A. L. Han, Gan, B. S., 2019, “Free Vibration of Orthotropic Levy-Type Solution Plates by Using SEM”, IOP Conference Series: Materials Science and Engineering, Vol. 615, Pp. 1-8. https://doi.org/10.1088/1757-899X/615/1/012081
  1. Ekaputri, J. , Lie, H. A., Fujiyama, C., Shovitri, M., Alami, N. H., Setiamarga, D. H. E., 2019, “The Effect of Alkali Concentration on Chloride Penetration in Geopolymer Concrete”, IOP Conference Series: Materials Science and Engineering, Vol. 615, Pp. 1-12. https://doi.org/10.1088/1757-899X/615/1/012114
  1. Hidayat, A., Hu, H. T., A. L. Han., Haryanto, Y., Widyaningrum, A., Pamudji, G., 2019, “Nonlinear Finite Element Analysis of Traditional Flexural Strengthening Using Betung Bamboo (Dendrocalamus Asper) on Concrete Beams”, IOP Conference Series: Materials Science and Engineering, Vol. 615, Pp. 1-8. https://doi.org/10.1088/1757-899X/615/1/012073
  1. Hardjasaputra, , Cornelia, M., Gunawan, Y., Surjaputra, I. V., Lie, H. A., Rachmansyah, Pranata Ng, G., 2019, “Study of mechanical properties of fly ash-based geopolymer concrete”, IOP Conference Series: Materials Science and Engineering, Vol. 615, Pp. 1-9. https://doi.org/10.1088/1757-899X/615/1/012009
  1. Han, A. L., Setiawan, H., Hajek, P., 2019, “Laboratory Concrete Specimens Waste, a Case Study on Life Cycle Assessment”, IOP Conference Series: Earth and Environmental Science, Vol. 290(1), Pp. 1-7. https://doi.org/10.1088/1755-1315/290/1/012015
  1. Harijanto, S., Ervianto, W, I., Lie, H. A., 2019, “Green Construction Capability Model (GCCM) for Contracting Companies”, IOP Conference Series: Earth and Environmental Science, Vol. 290(1), Pp. 1-7. https://doi.org/10.1088/1755-1315/290/1/012159
  1. Han, A. L., Gan, B. S., Budipriyanto, A., 2018, “Shear-Bond Behavior of Fiber Reinforced Polymer (FRP) Rods and Sheets”, MATEC Web of Conferences, Vol. 195, Pp. 1-7. https://doi.org/10.1051/matecconf/201819502001
  1. Purwanto, Han, A. L., Nuroji, Jaya Ekaputri, J., 2018, “The Influence of Molarity Variations to the Mechanical Behavior of Geopolymer Concrete”, MATEC Web of Conferences, Vol. 195, Pp. 1-9. https://doi.org/10.1051/matecconf/201819501010
  1. Kiryu, S., Han, A. L., Nurhuda, I., Gan, B. S, 2018, “Analysis of Steel Reinforced Functionally Graded Concrete Beam Cross Sections”, MATEC Web of Conferences, Vol. 195, Pp. 1-8. https://doi.org/10.1051/matecconf/201819502031
  1. Setiawan, Y., Han, A. L., Gan, B. S., Utomo, J., 2018, “Numerical Analysis of Castellated Beams with Oval Openings”, MATEC Web of Conferences, Vol. 195, Pp. 1-9. https://doi.org/10.1051/matecconf/201819502008
  1. Gan, B. S., Nguyen, D. K., Han, A. L., Alisjahbana, S. W., 2018, “DOF Condensation of Thick Curved Beam Element Formulated by Isogeometric Approach”, Lecture Notes in Mechanical Engineering, Pp. 545-559. https://doi.org/10.1007/978-981-10-7149-2_37

 

Accredited Journal

  1. Eratodi, I. G. L. B., Awaludin, A., Han, A. L., Triwiyono, A., 2020, “Kajian dan Evaluasi Struktur Slab Prestressed Precast Modular Concrete”, Media Komunikasi Teknik Sipil, Vol. 26(1), pp. 44-51 https://doi.org/10.14710/mkts.v26i1.27765
  1. Haryanto, Y., Hu, H. T., Han, A. L., Hidayat, B. A., Widyaningrum, A., Yulianita, P.E., 2020, “Seismic Vulnerability Assessment Using Rapid Visual Screening: Case Study of Educational Facility Buildings of Jenderal Soedirman University, Indonesia”, Civil Engineering Dimension, Vol. 22(1), Pp. 13-21. https://doi.org/10.9744/ced.22.1.13-21
  1. Utomo, , Ekaputri, J. J., Antonius, Han A. L., 2019, “Evaluasi Kinerja Seismik Rangka Beton Pemikul Momen Khusus dengan PERFORM-3D”, Media Komunikasi Teknik Sipil, Vol. 25(1), Pp. 27-37. https://doi.org/10.14710/mkts.v25i1.19310
  1. Wariyatno, N. G., Han, A. L., Gan, B. S, 2019, “Proposed Design Philosophy for Seismic-Resistant Buildings”, Civil Engineering Dimension, Vol. 21(1), Pp. 1-5. https://doi.org/10.9744/ced.21.1.1-5
  1. Sapulete, C. A., Han, A. L., Priastiwi, Y. A., 2018, “Sustainability Beton Metode Life Cycle Assessment Studi Kasus: Limbah Beton Laboratorium Bahan dan Konstruksi Departemen Teknik Sipil Universitas Diponegoro Semarang”, Media Komunikasi Teknik Sipil, Vol. 2 (2), Pp. 140-147. https://doi.org/10.14710/mkts.v24i2.18863
Copyright © 2025 Han Ay Lie All Right Reserved. Online CV Resume Theme By eDataStyle . Proudly powered by WordPress .
Han Ay Lie